How To Cut Pex Pipe?

Rate this post

Tools needed: How To Cut Pex Pipe?

PEX pipe, Pipe cutter or ratchet pipe cutter
A pipe cutter, particularly one designed to accommodate the diameter of PEX tubing, may quickly and easily cut through three-quarter-inch PEX. With the help of a pipe cutter, you can cut the tube in a straight line with very little effort. There is no difference in performance between using a big or small tube diameter.

The trick to successfully cutting PEX is to ensure that the cut is even, and this is particularly important if you are going to be utilizing a quick-connect fitting, a SharkBite fitting, or a JACO fitting. An uneven section of tubing will prevent a quick-connect fitting from locking into position and forming a seal.

It is recommended that you make use of a ratchet cutter if you are working with PEX tubing that has a bigger diameter, such as an inch or an inch and a half. A ratchet cutter may also be used to cut PVC pipes.

When it comes to cutting PEX tubing, there are certain dos and don’ts.


Make sure you get a clean cut.
Be careful not to fracture the tube.
Be careful not to pinch the tube.
Avoid forming any angles at any costs.

Without a cutter, how do you go about cutting PEX?

Although a utility knife is not the tool of choice for cutting PEX tubing, it might be used in a pinch if no other option is available. Maintaining the knife at a right angle to the pipe, put the point of the blade into the center of the opening. When you want to cut through the pipe about halfway, pull the blade down.

  How To Connect A Wii To A Smart Tv?
How To Cut Pex Pipe?

I have a pipe cutter; would it work to cut PEX tubing?

A pipe cutter, particularly one designed to accommodate the diameter of PEX tubing, may quickly and easily cut through three-quarter-inch PEX. With the help of a pipe cutter, you can cut the tube in a straight line with very little effort. There is no difference in performance between using a big or small tube diameter.

Is it possible to cut PEX using PVC cutters?

The most popular sizes can accommodate pipe with a diameter of up to 1 1/4 inches and start at a price of approximately ten dollars, making them extremely reasonably priced. If you have a reasonably strong grip, you should be able to ratchet the cutter until it makes a clean cut through the PVC pipe with relative ease. These cutters are also very effective when used to cut CPVC and PEX pipe.

How do you straighten a PEX pipe that is one inch in diameter?

Pex pipes are offered in coils or straight pieces. The coils have a tendency to tenaciously maintain their form. They may be made straight again by subjecting them to heat, placing them in direct sunlight for a period of time, subjecting them to human pressure, or making use of a pipe straightener until they take on the form that is required.

How To Cut Pex Pipe? Source: Youtube

What are PEX A and PEX B, respectively?

Flexibility: PEX-A is the most flexible of the three types, which makes it possible for it to be joined by cold expansion. This, in turn, makes it possible for the end to be fluted before the fitting is inserted. PEX B is not expandable, therefore it is imperative that you never attempt to extend the end of a PEX-B pipe. When it comes to kink resistance, PEX-A has the highest rating, while PEX-B has the lowest.

  How To Clear Service 4Wd Light?

What is the most effective device for cutting PVC pipe?

PVC pipe is often cut with a hand saw, which is the most popular method but may create quite a bit of debris in the process. It is possible to use practically any kind of saw, but a hacksaw is recommended since it offers a great deal of versatility.

In what range does PEX operate?

The abbreviation PEX refers to cross-linked polyethylene. It is constructed out of high-density polyethylene, which has cross-linked linkages throughout the structure of the polymer. This can seem confusing, but all it means is that the material in question is bendable and can withstand significant forces (up to 180F for plumbing applications).

Similar Posts