How To Connect Soundcore Earbuds?

Rate this post

If you’ve just purchased a brand new set of Soundcore earbuds, then you’re definitely curious about how to connect them to the electronic device you’re using. We won’t keep you waiting any longer than necessary. Let’s plunge in! How To Connect Soundcore Earbuds?

How to properly connect your Soundcore Earbuds

The Pairing Process changes depending on the Soundcore earphones that you have available to use. Simply pick the kind of Soundcore earbuds that you possess and follow through with the instructions that are provided below; we cover the pairing procedure for each of the different types of Soundcore earbuds.

How to Combine the Soundcore Liberty 3 Pro, the Soundcore Liberty Air 2 Pro, the Liberty Air 2, the Life P3, the Life P2, and the Life A2

How To Connect Soundcore Earbuds?

When you open the case, both earbuds should be within it.

Select your Soundcore headphones from the Bluetooth list on your smartphone, then press and hold the button that is situated on the back of the earbuds for three seconds. This will cause the white LED on the back of the earbuds to begin flashing.
You’ll need to reset your earphones if your device isn’t connecting properly or if you’re only able to couple one earpiece. Here’s how to do it:

When you open the case, both earbuds should be within it.

On your device’s Bluetooth list, choose one of your Soundcore earbuds, and then select connect after pressing and holding the button that is placed in the rear for ten seconds (you will see that a white LED will begin to flash).
After waiting for 5 seconds, insert the second earbud into the device.
Check out our in-depth tutorial on how to fix the problem if you still can’t get one of the earbuds to connect with your device.

How to Match Your Soundcore to Your Lifestyle A1:

Take the earphones out of the charging case and make sure the power is turned off on each of the earbuds.
While holding down the multi-function button on both earphones, do the following procedure:
Resetting your Soundcore Life A1 is something you should do if you find that your earphones still aren’t connecting or if just one earbud appears to be functioning properly.

  How To Charge Fitbit Without Charger?

At the very least ten seconds
Once you have opened the charging case, press and hold the button on both earphones for a total of eight seconds.
After three consecutive red flashes, the LED indicator will turn white.
When you remove both earbuds from their case, they should instantly start pairing with one another.
When it is ready to be paired, the indicator light on the right earbud will flash rapidly, while the indicator light on the left earbud will flash gently.
Soundcore Life Dot 2: Instructions on How to Pair It:

If you have a second device that you’d want to connect to your Life Dot 2, please utilize one of the following methods:

To turn off your earphones, press and hold the button on each one of them for a total of eight seconds.
To enter the pairing mode, press and hold the button located on each earpiece for three seconds.
Now press and hold the button for the earphones for one second to turn them on.
Resetting your Soundcore Life dot 2 is something you should do if you find that your earphones still aren’t connecting or if just one earbud seems to be functioning properly.

Wait at least ten seconds after placing both earphones in the charging case; in order to reset your smartphone, the earbuds must be charging at the same time.
Once you have opened the charging case, press and hold the button on both earphones for a total of eight seconds.

How To Connect Soundcore Earbuds? Source: Manual


After three consecutive red flashes, the LED indicator will turn white.
When you take both earphones out of their case, the indicator light on the right earbud will flash rapidly, and the indicator light on the left earbud will flash gently to indicate that it is ready to connect with the right earbud.

  How To Beat Theater Mechanicus?


Why won’t my Soundcore earphones connect to my device?

In many different situations, the Soundcore earbuds will not connect successfully if they are not within range of a clean Bluetooth connection. Remove any obstacles that may be in the way of the connection between your device and the earphones, and then relocate the earbuds so that they are as close to your device as is physically feasible before attempting to pair them again.

If you have followed the steps above and they still won’t connect, put them both in the charging case, make sure it is closed, and then pull them both out and try connecting them again. In the event that this does not resolve the issue, you may try resetting them by removing the entry for “Soundcore” from the Bluetooth list of the device that is being connected to, after which you should switch off Bluetooth and then turn it back on again.

A walkthrough on how to reset your Soundcore earphones

It is necessary to place one of the Soundcore earphones into the charging case and check that it is charging in order to reset the earbuds (It will have a white LED indicator when charging). Continue to touch and hold the button that is located on the back of the SoundCore casing for about ten seconds, or until the LED indicator flashes three times. After you have finished doing that, you may be certain that all pairing information has been removed from your device.

Instructions on how to link your Android phone to your Soundcore earphones

This one shouldn’t be too difficult. Navigate to the Settings menu on your phone, and then choose the Connections option. After that, go to the page labeled “Wireless and Networks” and turn on your Bluetooth connection there.

Simply tap the Bluetooth icon on your phone, and then let it search for nearby devices.
After a brief period of time, Soundcore will become visible and be added to the list.
You may connect your phone to Soundcore by selecting that option.

  How To Clean Oculus Quest 2 Lens?

After the pairing process is complete, your speaker will make a beeping sound, and the Bluetooth lights will turn blue to show that the earbuds are successfully linked to your phone.
Instructions on how to link your iPhone to Soundcore
You may turn on Bluetooth by going to the icon labeled Settings on your iPhone.

Your phone will begin searching for other devices that are available.
After a little wait, you’ll see that Soundcore has been added to the list.
You should then choose Soundcore and listen for an audible confirmation of your selection. Indicating that the connection has been made, the light will change color to blue.

Instructions on how to connect your Soundcore earphones to a computer running Windows

It is not at all difficult to connect Soundcore earphones to a computer that is running Windows.

To activate the computer’s Bluetooth connection, go to the Devices menu and choose the appropriate option.
Choose “Add Bluetooth” from the available menu options.
Make sure that Bluetooth is selected from the menu.
Choose Soundcore from the list of devices that has been scanned for availability.
After successfully pairing the Soundcore earbuds with your personal computer, you will hear a beep to let you know that the connection has been made.

The steps necessary to connect Soundcore to your MacBook

Connecting Soundcore to a Macbook is a straightforward process, much like connecting to a PC running Windows. First things first, open the carrying case and remove your Soundcore earphones that have been charged. A white flashing light is going to be emitted by one of them. Turn on your Macbook’s Bluetooth, go through the list of devices it finds, and click the connect button when you see Soundcore on the list. If you see that either one or both of the earbuds are flashing fast, you should re-insert them into the charging case so that they may be charged.

Similar Posts