How To Clean Rust Off Blackstone Griddle?

The Blackstone Griddles brand produces some of the most high-quality flat top grills available. Find out how to properly maintain the cooking surface of your griddle so that you can avoid the accumulation of rust and oil over time. In this cleaning instruction, you will be guided through all you need to know, including how to care for the burners, season the grill, and avoid rust.

The variety of outdoor griddles offered by Blackstone is ideal for use in outdoor grilling, but consistent usage, similar to that of any other sort of cooking station, may result in the accumulation of oil, wear, and even rust over time. Here is how to maintain your Blackstone griddle so that it lasts a long time without showing signs of wear.

When you’ve just finished a long session in the kitchen, the last thing you probably want to do is clean up. When grills are involved, this procedure becomes considerably more laborious.

on the food it was burned. Grease. Flakes that are charred. It’s not an easy errand to run.

However, it is essential to maintain a consistent routine with the cleaning. Your grill may deteriorate over time if it is not properly maintained. You will get the most use out of your cooking area if you make the practice of cleaning your flat top grill or griddle a regular routine.

If you take care of your grill, it will reward you by taking care of you.

Taking care of a griddle is not a difficult task at all. A Blackstone requires maintenance just like any other kind of cookware, so don’t expect it to be any different.

Blackstone barbecues are among the most long-lasting products available, but even they have their limits. If you wash it appropriately and carefully, you can safeguard it for many years to come.

I’m going to teach you how to clean your Blackstone griddle so that it lasts longer, doesn’t rust, and doesn’t become moldy by following the steps in this article.

Let’s get into it!

How to season a Blackstone griddle

The act of seasoning a grill before using it is among the most beneficial things that can be done to that grill. Please don’t be confused by the language used here; this is not a technique in which salt is added to its exterior. Instead, it refers to the process of spreading a very thin coating of oil on the top of the griddle. After that, we heat the oil, and then we wait for it to solidify.

This creates a thin layer barrier over its surface, which helps to prevent food from clinging to it and protects it against the risk of rust or wear. In addition, this helps to prevent food from sticking to it.

We use this method to all of our barbecue smokers, and you should do the same thing with your grills.

To clean the surface of the grill, all you need to do is fill a bucket with warm soapy water and use a dishcloth or towel to scrub it down. This will assist with removing any residue or dirt that may have been left on it as a result of it having been stored.

The griddle should be left out in the open air to dry for about one hour.

Now would be a good time to begin seasoning it. Spread a very thin coating of oil all over the surface of the grill, and then use a cloth to distribute the oil as evenly as you can. Cover the whole surface of the griddle and go into as many different areas as you can.

Raise the temperature of the griddle so that it is operating at a medium-high level. Give it some time to heat up and the oil will start to smoke.

As soon as you see smoke coming from it, remove it from the heat and let it cool down. Repeat the process with warm, soapy water and wash thoroughly this time. Let it dry fully before proceeding.

The griddle that you have is now ready to be used.

How to clean a Blackstone grill

Because prevention is always the best course of action to take, you should make it a point to clean the griddle after every usage.

The scrapers that Blackstone sells under their own name are of excellent quality and perform well for this purpose. They are not very costly, and in my experience, it is generally advisable to stick to branded instruments in order to preserve the validity of the guarantee. Take a look at it over here.

Give the grill plenty of time to cool down fully. This time, all you need is some warm water and a rag to clean everything off. If you want to keep the quality of the griddle surface intact for as long as possible, you should avoid using soapy water as much as possible.

After it has fully dried, put it away in a dry and cold area until you are ready to use it.

Be cautious not to put it away for storage if it has any trace of moisture left in it. This is a recipe for disaster since the presence of water, air, and steel will surely result in the formation of rust.

You should avoid using any cleaning agents, such as oven clear or detergents. They have a high corrosive potential and will almost certainly cause rust or other damage to your Blackstone. In addition to this, they have a propensity for leaving behind chemical residues. In the long run, this can even cause some rather nasty tastes to develop in the meat you’re cooking.

Scrubbers that are too abrasive should also be avoided. It should come as no surprise that they are capable of seriously damaging a wide variety of equipment, including your griddle, for a variety of reasons. Stick to using regular washcloths even though it could be tempting to use them when you’re dealing with food that has been burnt on. Trust me.

Blackstone griddle maintenance tips

Always ensure that the griddle has been heated for about ten minutes before each usage. This will not only make cooking simpler, but it will also make it less likely that the meat will adhere to the griddle’s surface when you attempt to remove it. After each usage, cleanup will be much simplified as a result of this change.

When you cook, be sure to use a substantial quantity of oil for the same purpose. This will assist prevent the meat from clinging to the surface of the griddle, which will further safeguard the integrity of the surface.

How to clean a Blackstone griddle

The most effective method for cleaning your Blackstone Griddle and removing rust that has built up over time!

You are going to need:

• Scraper
• Sponge
• Cooking oil
• Lemon juice
• Sandpaper

Instructions

• After usage, you should wait for the griddle to fully cool down. To clean the griddle, all you need is some warm water and a rag. It is important to stay away from soapy water as well as other caustic cleaning agents such as oven cleaner and detergent. Give the griddle some time in a dry, cold environment to thoroughly dry out.
• After the griddle surface and the burner guards have had a chance to dry, the cooking surface lock must be unhooked in order to remove them. Soak burner guards in warm water. Use a sponge to clean the surface. After wiping with a clean cloth, allow the surface to air dry.
• To clean the rust from the grill, bring the temperature up to a comfortable level. Because of this, the rust will be able to fade away to some degree. Put an end to the heat. On the surface of the cooking surface, squirt a few drops each of cooking oil and lemon juice. Sandpaper should be used to carefully remove any rust that is still present.
• In order to get rid of oil, mix a tiny amount of vinegar with warm water in a basin and set it aside. Use a sponge soaked in the cleaning solution to wipe out the griddle.

How do you remove heavy rust from a griddle?

After turning on the griddle, maintain a high heat for the next 20 minutes. Rust becomes more loosened and hence simpler to remove as a result of this. Wait for the griddle to reach room temperature, then remove the metal scraper from the accessory toolbox that came with the Blackstone. Scrub the whole flattop with the wire brush until there is no more rust to be seen.

Can you cook on Rusty griddle?

As long as it’s not a regular occurrence, cooking your food on a rusty surface while using the grill won’t do any damage. Rust is composed of iron oxide, which, when ingested in excessive amounts, may be hazardous to one’s health. Because of this, it is in your best advantage to maintain the highest possible level of cleanliness in your cooking grates.

Can you clean a rusty grill?

In a spray bottle, combine two parts vinegar with one part salt. Shake well. After completely coating the grates in the vinegar solution, place them in an old plastic bag and let them there for the night. After leaving the grill grates to soak for the night, wipe them off with an old towel to eliminate any rust residue that may have accumulated.

Does vinegar remove rust from cast iron?

You may either add the solution to the pan if the rust is just on the inside of the pan, or you can totally immerse the pan in a bucket of the stuff to dissolve the rust all over the pan. If the rust is only on the interior of the pan, then adding the solution to the pan is the better option. Depending on the extent of the damage, letting it soak for approximately an hour should be enough to fix it.

Does Coke remove rust from cast iron?

Phosphoric acid, which is an ingredient in coke, is a chemical that may eliminate rust. The taste of coke comes from phosphoric acid, which is the main ingredient (that I know you love). On the other hand, this is precisely what makes it far more acidic than vinegar or any other acid. Because it is reasonably priced, cleaning cast iron and removing rust from it with coke is an effective method.