Here is a step-by-step guide on carefully cleaning your Oculus lenses so that they appear as good as new.
There is a good chance that you have pondered the question of how to clean Oculus lenses if you possess an Oculus Quest 2. After using the best Oculus Quest 2 games, it seems that it does not matter how cautious you are; the lenses of the finest virtual reality headset will always end up marred with fingerprints and smudges. When it gets to that stage, there is a need to take action since the experience as a whole is destroyed by the fuzzy eyesight.
Try not to freak out. In this section, we will walk you through the process of cleaning, from the supplies that you will need to the most effective ways. There is literally no excuse not to keep one’s Oculus lenses clean since doing so requires no effort at all and just a few seconds of one’s time. Here is a guide on how to clean the lenses on your Oculus.
How to clean Oculus lenses
This solution is applicable to both the Oculus Rift and the Quest lens sets, so feel free to use it regardless of whatever virtual reality headset you have.
According to Oculus (opens in new tab) (or Meta), the best way to clean the lenses is to use a dry optical lens microfiber cloth. This is the approach that is recommended. In conclusion, you should not clean the headset with any liquids or chemical cleaners since doing so may harm the headset and render your warranty void. In the event that you do not already own a microfiber cloth, we strongly suggest purchasing the Edison & King Extra Large Microfiber Cleaning Cloth, which can be purchased for $9.99 from Amazon (opens in a new tab).
RECOMMENDED VIDEOS FOR YOU…
Wipe the lens gently in a circular motion, starting from the middle of the lens and working your way to the edges. After that, wipe the second lens with a new, unused part of the towel. That is the extent of the matter.
How to clean the rest
Why don’t you use this opportunity to give the rest of the headset a once-over as well? Again, this is something that can be done with pretty little effort and will help preserve your Oculus.
To clean the outside of your headset, you should use a microfiber towel that has been squeezed dry. As you go through this process, be sure that you have a firm grasp on the controller, and avoid applying any pressure wherever the sensors are located if you are using a Quest 2. If you are looking for microfiber cleaning cloths, the MR.SIGA Microfiber Cleaning Cloths are an excellent alternative. You can get them on Amazon for $11.99
Sanitizing wipes that are non-abrasive and anti-bacterial may be used to clean and disinfect the straps and the foam. Because alcohol and other abrasive cleaning agents may also cause harm, it is imperative that you do not use any of them.
You may do a more thorough cleaning on the top strap of your Oculus Quest 2 if it has been noticeably discolored for any reason, including grease or hair coloring. To begin, take off the helmet entirely by first removing the velcro from the top strap, and then by slipping the top strap away from one of the sides that have been detached. The next step is to wash your headstrap in cold soapy water and then rinse it before hanging it out to dry in the open air for twenty-four hours. It should not be dried in the dryer. After that, reconnect it once it’s dry.
You may use a dry microfiber cloth or non-abrasive anti-bacterial wipes to clean the controllers, which is a procedure that is quite similar to the one used for cleaning the straps and the foam. Once again, alcohol and abrasive chemical cleansers are not permitted. Be careful to clean the controllers thoroughly, paying particular attention to the areas around the grip and in the spaces between the buttons. When you’re not using your Oculus Quest 2 headset, it’s important to store it in a case to prevent fingerprints and other marks from appearing on the display.
How do I clean the lenses on my oculus?
According to Oculus (opens in new tab) (or Meta), the best way to clean the lenses is to use a dry optical lens microfiber cloth. This is the approach that is recommended. In conclusion, you should not clean the headset with any liquids or chemical cleaners since doing so may harm the headset and render your warranty void.
Can you replace Oculus Quest 2 lenses?
Even though the Oculus Quest 2 does not allow you to swap out your lenses for new ones, you still have the option of purchasing specialized lenses. They accomplish one of two goals, or maybe both simultaneously!
What can you clean VR lenses with?
When wiping the lenses, a cleaning cloth such as one made of microfiber should be used. Alcohol or lens cleaning solution should be used to dampen the cleaning cloth. Wipe the lenses using a circular motion, starting in the middle and working your way out to the edges. When you are cleaning the lenses, you need to be careful not to scratch them.
Can you use water to clean Oculus lenses?
Under no circumstances should you clean your lenses with liquid cleansers or water, since this might cause permanent damage to the electrical components. Wipe the lens using a circular motion, beginning in the middle of the surface. Make use of the towel made of microfibre to clean a little circle in the middle of the lens.
Why is my Oculus go blurry?
Because of the optics and the eye box, virtual reality images tend to be fuzzy. The lenses of the virtual reality headset are of low quality, and there is no sweet spot on the headset, both of which contribute to the blurriness. In comparison to a lens of higher quality, a lens of really poor quality will cause your eyesight to be distorted and unclear.